Batteryminder – BatteryMINDer E12248-AA-Series User Manual
Page 22

BatteryMINDer
®
Aviation-Adjusted Models
E
12248-AA-S2, S3 & S5
Rev. C-071213-1
Page 22
P/N VDC
E
12248-AA-Sx-MNL
DETAILED SPECIFICATIONS - VDC Models E12248-AA-S2, S3 & S5
14.1V --- 8A MCU controlled H.F. Battery Charger
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to CE safety and EMC test. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one of more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Electrical Parameters
Input Voltage:
220 - 240 Vac
Input Frequency:
50 Hz
Unloaded input current: 80 mA ac
Input Current consumption at 220 - 240 input, output 13V 8A loading (UL1236)
Approx: 1A ac
Electrical Cable
Input Lead and plug specifications:
VDE H05VV-F 18AWG X2 with VDE 3-pin plug, External Length 6 ft
Output lead:
SPT-2 105°C VW-1 16AWG with Trailer connector, External Length 6 ft
Extension cord:
SPT-2 105°C VW-1 16AWG with Trailer connector & battery clamp, External
Length 2 ft
Ambient Thermal Sensor:
3”
Physical Parameters:
Weight: 2.2 lbs.
Plastic enclosure material:
UL-94V0 #1 Noryl or #2 PC+ABS #3 PC
Enclosure Dimension:
Approx. 5.713” (W) x 5.516” (L) x 2.86” (H)
Environmental Characteristics
Operating temperature:
-10° to 40°C
Storage temperature:
-10° to 80°C
Operating Humidity range:
0 to 95% RH