BARSKA BE11642 Elite Edition Metal Detector - Manual (Page 10)

10
2. SETTING THE OPERATION MODE
The detector comes with three operating modes ALL METAL, DISC, NOTCH.
You can select the desired mode by relative touch key.
a. ALL METAL—used for detecting any type of metal. When the detector
detects any type of metal, it sounds a tone
b. DISC—used for target discrimination. You can set the target range from MAX
to MIN by pressing DISC/NOTCH and + & - keys. The detector can detect
the metal type indicated on the display. Meanwhile the detector rejects other
metal types without displaying on the screen. For example, press - key, 4
levels on segment from Max to Min is increased. At this time, the detector
can detect S- CAPS, 1¢ and also 25¢, other types of metal are rejected.
c. NOTCH—to ignore the metal type you do not want. You can select the metal
type desired by pressing the + and - keys. The LCD segment will indicate the
selected types of metal. The detector can detect the selected metal type.
TESTING AND USING THE DETECTOR
To learn how the detector reacts to different metals, you should test it before
you use it the first time. You can test the detector indoors and outdoors.
Indoor Testing and Use
1. Slide POWER to ON
2. Set the operating mode.
3. Place the detector on a wooden or plastic
table, then remove any watches, rings, or
metal jewelry you are wearing.