BARSKA BH11948 - Loaded Gear AX-50 Hard Case - Manual

©2012 BARSKA ® La Verne, CA 91750, USA
www.barska.com | www.loadedgear.com
6/12 BC226
AX-50 Hard Case Combination Lock
Initial Set-Up
1. Open Case: Slide button to the right to release the lock
2. Remove red security tab by sliding it out of place
3. Keep case OPEN during Setting Combination process
Setting Combination
1. Slide and hold button to the left, do not release
2. Set desired numbers for your combination and
release button
3. Do NOT close case, until you’ve tested your combination
NOTE:
- Make sure to remember or write the combination numbers
and place it in a secure place, NOT inside case
- Once the combination is set and case is locked; the case
can not be opened without the correct combination
Testing the Combination
1. With case OPEN, change combination numbers to
random numbers
2. Slide button to the right, the button will NOT move
3. Enter your combination; slide button to the right, latch
will move
4. The combination has been successfully set
5. Close and lock case
Reset Combination Lock
1. Enter your previous combination
2. Open case and follow Setting Combination procedures
A B
see image A
see image B
Button
Combination Numbers