Brickcom MD-300N - Manual (Page 32)

- 29 -
6. If the camera supports the EasyLink
TM
function, the following page will be
displayed. Otherwise, this page will not be shown. *If desired, click to
skip this setting.
EasyLink
TM
is a unique Brickcom function which allows users to assign a unique EasyLink
name to
their network camera’s IP address. There is no need to configure the router to open
up ports or remember hard-to-memorize IP addresses. Users can log onto
[uniqueEasyLink
name].mybrickcom.com to view the camera’s web GUI and live view.

Enter a unique EasyLink name whose length must be between 5-32 characters.

When finished, click the arrow button to continue.