Brickcom MD-300N - Manual (Page 15)

- 12 -
b. If using a non-PoE switch:
i. Use a standard RJ-45 cable to connect the camera to a PoE Injector.
ii. Use a standard RJ-45 cable to connect the PoE Injector to the non-PoE switch.
iii. Use a standard power cable to connect the PoE Injector to a power outlet.
c. If using the DC12V for the power Supply. The RJ45 cable will be data
transmission.
Complete the Installation
Place the dome cover back on the camera device using the Allen Key.