Brickcom FB-series User Manual
Page 13
12
3.
Once the image is focused, the buzzer will make a long beep for 3 seconds for
notification.
1.
Connect the CS-mount lens to the camera by turning it clockwise
2.
Plug the lens cable in the side camera connector.
3.
If necessary, adjust focus controller, and zoom controller to get the best image
condition.
To adjust the lens:
1.
Adjust zoom controller to decide the focal length.
2.
Adjust the focus controller to adapt the image to the focal length.
*For further information of vari-focal lens with auto iris, please refer to the supplied lens
’
instruction manual.