Chapter 5- installation, 1 hardware installation – Brickcom FB-series User Manual
Page 12
11
Chapter 5- Installation
5.1 Hardware Installation
Mounting the CS-Mount Lens to the Camera
1.
Connect the CS-mount lens to the IP camera by turning it clockwise.
2.
If necessary, adjust the iris controller, focus controller, and zoom controller to get the
best image condition.
To adjust the lens:
1.
Adapt the iris to current environment by adjusting iris controller (The more the iris is
opened, the brighter the scene will be).
2.
Adjust zoom controller to decide the customize focal length
3.
Adjust the focus controller to adapt the image to the focal length.
Focus A
djustment with FocusEasy™ (FocusEasy™ version only)
1.
Cover the lens for 3 seconds to black out the image until the buzzer beeps.
2.
Adjust the focus and listen to the beeps:
The farther the image is from the focus, the slower the beeps are. When the image
gets closer to the focus, the beeps go faster, just like the car reverse radar.