haier HSU-09RS03_R2(SDB) - Manual (Page 9)

iFP Operation ECO Operation
The power saving function only works under
the cooling, heating or dehumidifying mode,
after the power saving function is set, press
the sharp, mute, sleep, or smart key to exit
the power saving function.
and automatically control the switch of the
compressor, which may be inconsistent with
the user’s setting.
The power saving function is more effective
after the air conditioning has been running
for a long time (more than 2 hours)
SMART
ECO
ECO
SMART
iFP
The movement of people in the room can be sensed,
which can improve the air adjustment efficiency.
1
iFP
2
Remote controller:
BLANK
and “ ” is displayed on the
Every time the button is pressed,
display changes as follows:
In iFP,FOLLOW and EVADE operation mode, Press “ ”
AM AM
display board, unit will unrin
Detect the location of the human body, adjust the
wind swing,blow the location where the body is.
Detect the location of the human body,adjust the
wind swing,avoid the location where the body is.
Automatic adjusting with the environmental temperature,
running with power saving.
Operation
Press iFP button “ ” is
displayed on the remote controller
iFP mode.
When several people are located at different positions,or
one person is moving in different areas, no matter whether
the wind is blowing or not, the wind will automatically swing
and blow to multi areas, the wind direction adjustment will
be delayed, it cannot be deflected suddenly while detecting.
button, the unit will not operate “ ” mode, Press “ ”
button, the operation stops.
The human body sensor is used to detect if the infrared
ray is changing. It may be inaccurate in the following
The human body keeps still (when reading or watching
TV etc.) or is blocked by barriers like screen, cabinet
The person is wearing very thick clothes or the person
A pet is moving frequently, or the wind is blowing the
curtains, or something in the room is swinging frequently.
or glass.
is lying or sleeping.
conditions:
Press ECONOMY button “ ”
is displayed on the remote
controller,unit will run in
ECONOMY operation.
Press ECONOMY button For
twice press, ECONOMY
disappears, the operation stops.
After the power saving is set, the host machine
will automatically adjust the setting temperature,
9