haier HSU-09RS03_R2(SDB) - Manual (Page 4)

SMART Operation
SMART
ƽ
SMART FRESH
ƽ
SMART Defrost
ƽ
SMART FAN SPEED
ƽ SMART FAN HEALTH
ƽ
SMART SOFT
Under the cooling, heating and dehumidifying mode,
press the smart key to enter the smart function.
When the smart function is running, press the “cooling”
“heating” or “dehumidifying” key to switch to the other
mode, you will exit from the smart function.
Under the smart running mode, when the air
conditioning is running, it will automatically select
cooling, heating, dehumidifying or blowing mode as
The air conditioning unit can judge
the indoor temperature and humidity,
and make the adjustment accordingly.
SMART SMART start
Press ON/OFF button, unit starts.
Press SMART button“ ” is
displayed on the remote controller
ƽ
SMART DRY
ƽ
SMART Control temperature
SMART SMART stops or
COOL,HEAT and DRY Operation
SMART
Unit start.
1
Select operation mode.
2
Press COOL button“ ” is
Press HEAT button“ ” is displayed on the remote
Press DRY button“ ” is displayed on the remote
SMART
AM
SMART
AM
Operation
(This function is unavailable on
One key can give you a comfortable
some models)
room!
and “ ” is displayed on the
display board,unit will run in SMART
per the setting temperature.
mode.
displayed on the remote controller
and “ ” is displayed on the
display board,unit will run in
COOL mode.
controller and “ ” is displayed on the display board,
unit will run in HEAT mode.
controller and “ ” is displayed on the display board,
unit will run in DRY mode.
1.In DRY mode, when room temperature becomes lower
o C, than temp.setting+2 unit will run intermittently ai
2.Remote controller can memorize each operation status.
When starting it next time, just press ON/OFF button
LOW speed regardless of FAN setting.
and unit will run in previous status.