B&K Precision 1747 - Manual - Manual (Page 22)

20
6. STAT?
The power supply responds to this command with one of the following
messages:
CV if the power supply is in Constant Voltage mode
CC if the power supply is in Constant Current mode
7. OUT ON
Turn on the output.
8. OUT OFF
Turn off the output.
9. IDN?
The power supply responds to this command with the following message:
B+K PRECISION 1747 Revision x.x
5.3 Application Software
Remotely control your 1747 using B&K Precision’s application software, available for
download at
www.bkprecision.com . This software provides a virtual front panel and
a simple data logging function to store and log data to a text or CSV file. RS232
commands can also be sent through the software.