Neff D99L20N0 - Manual (Page 15)

15
Removing metal mesh grease filter
1. Hold the upper edge of the filter and carefully fold it forwards.
While doing this, place the other hand under the metal mesh
grease filter.
2. Lift the metal mesh grease filter up and out of the holder.
Note: Grease can accumulate in the bottom of the metal
mesh grease filter. Do not hold the metal mesh grease filter
at an angle, otherwise grease will drip out.
3. Clean the metal mesh grease filter.
Cleaning the inside of the appliance
Note: To make it easier to clean the inside of the appliance,
you can also remove the bars between the filters.
1. Hold the bars firmly and carefully pull them out of the holders.
2. Cleaning the inside of the appliance
3. Re-insert the bars in the holders.
Installing the metal mesh grease filter
1. Insert the metal mesh grease filter.
While doing this, place the other hand under the metal mesh
grease filter.
2. Fold the metal mesh grease filter upwards, locking it in place.
Trouble shooting
Malfunctions often have simple explanations. Please read the
following notes before calling the after-sales service.
:
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried
out and damaged power cables replaced by one of our trained
after-sales technicians. If the appliance is defective, unplug the
appliance from the mains or switch off the circuit breaker in the
fuse box. Contact the after-sales service.
Malfunction table
--------
Problem Possible cause Solution
The appliance
does not work The plug is not
plugged in. Connect the appliance
to the electricity supply
Power cut Check whether other
kitchen appliances are
working
Faulty fuse Check in the fuse box to
make sure that the fuse
for the appliance is OK
The button illu-
mination does
not work.
The control unit
is faulty.
Call the after­sales serv-
ice.
The lighting
does not work. The bulbs are
faulty. Call the after­sales serv-
ice.