Neff D99L20N0 - Manual (Page 13)

13
Getting to know the appliance
Control panel
Operating the appliance
Note: Switch on the extractor hood when you start cooking and
switch it off again several minutes after you have finished
cooking. This is the most effective way of removing the kitchen
fumes.
Setting the fan
Note: Always adjust the fan strength to meet current conditions.
If there is a large build-up of steam or fumes, select a high fan
setting.
Switching on
■ Press the # button.
The fan starts at setting 2.
■
Press the + or - button to change the fan strength.
Switching off
Press the
# button.
Intensive setting
You can use the intensive setting if there is a large build-up of
odours and fumes/vapours.
There are two different intensive settings available:
˜‚ - duration: 5 minutes
˜ƒ - duration: 10 minutes
■ Press the + button while the appliance is at ventilation setting
„ .
The intensive setting ˜‚ is activated.
■
Press the + button again to activate the intensive setting ˜ƒ .
Once the preset time has elapsed, the electronics automatically
switch the appliance back down to ventilation setting
ƒ . If you
wish to end the intensive setting before the preset time expires,
press the - button until the required setting is reached.
Fan run-on time
Press the $ button.
% and « appear in the display.
The run-on time is six minutes. Once this time has elapsed,
ventilation switches off automatically. If the lighting is switched
on, it remains on.
Setting the run-on time
During the fan run-on time, press the + or - buttons.
You can set the following run-on times:
Display
¬ : three minutes
Display « : six minutes
Display ª : nine minutes
Explanation
1
Flue
2 Lighting
3 Control panel
4 Metal mesh grease filter
Explanation
1 Fan On/Off
2 Fan on, turn fan up
3 Display panel
4 Turn the fan down
5 Fan run-on time
6 Switch on lighting