Autel Maxivideo MV201 - Manual (Page 26)

Operation Instructions
On Screen Navigation
25
While in the Primary Settings Screen (Fig. 12), select Advanced
Settings from Setup and then press OK button, you will enter
the secondary settings screen (Fig. 25) where you can set Date
and Time, Restore Defaults and select Language as needed.
Pressing Back button at any point will bring you back to the
primary settings screen and pressing it again will bring back to
the live screen.
Fig. 25
5.6 Icons
1) Battery Capacity – Fully charged battery.
2) SD Card – Indicates an SD card has been inserted into the tool.
3) Still Camera – Indicates the tool is operating in still camera
mode.
4) Video Camera – Indicates the tool is operating in video camera
mode.
5) – Indicates you to begin playing recording in the photo play
mode.
6) – Indicates you to start recording in the photo record mode.
7) – Indicates you are recording now in the photo record mode.
8) – Indicates you to play recording in the photo record mode.
9) – Indicates you to pause playing recording in the photo record
mode.
10) – Indicates you to delete the recording in the photo record mode.