Autel Maxivideo MV301 - Manual (Page 19)

18
5. Troubleshooting
SYMPTOMS
POSSIBLE
REASONS
SOLUTIONS
Display unit is on, but does not
show image.
Cable connection is
loose.
Check if it is
covered by
debris.
Imager head is
covered by debris.
Check and
reattach.
Monitor is
obstructed by
objects
Remove
obstructing
objects
LED on imager head are dim at
max brightness, display changes
between black/white and color,
display turns itself OFF after a
short period.
Batteries are low.
Replace
batteries.
The tool will not turn on.
Dead batteries.
Replace
batteries.
Batteries are not
properly installed.
Check to see if
the batteries are
installed with
correct polarity
as indicated.