Autel Maxivideo MV301 - Manual (Page 16)

15
 Do not use the imager head and cable to modify
surroundings, clear pathways or clogged areas.
 The handheld display unit is not waterproof. The imager
head and its cover are waterproof, but not acid-proof or
fireproof. Avoid submersing the imager head into corrosive,
oily places and be sure to keep the imager head away from
high temperature objects.
 Do not put the imager head and cable into anything or
anywhere that may contain a live electrical charge.
 If the tool does not work well after turning it on. Please take
batteries out and do not use. Please have the tool checked by
a qualified technician. Any tool that cannot be controlled
with the power button is dangerous and must be repaired.
 Store idle components out of the reach of children and other
untrained persons.
 Maintain the tool with care. Properly maintained tools are
less likely to cause injury.
 If the tool is dropped, check for the breakage and any other
conditions that may affect its operation.
 Use only accessories that are recommended by the
manufacturer of the tool.
 Dry your hands when operating the tool or
replacing batteries.
 Protect against excessive heat. The tool should be kept away
from heat sources such as radiators, stoves or others that
produce heat.

Store the tool in ventilated and dry places.
 The flexible tube is not subject to sharp angle bends and
such act may cause permanent damage to the shaft.