Autel Maxivideo MV301 - Manual (Page 11)

10
accessory and the imager head as shown in (Fig. 7), slip the end of
the accessory over the flats of the imager head and then fix the
accessory as shown in (Fig.8).
Fig. 7
Fig. 8
3.4 Video-Out Cable Connection
Insert the supplied video-out cable into the video-out port of the
tool, and the other end of the cable into the video-in port of a TV,
the LCD screen will output a high quality real-time image.
3.5 LCD Monitor Installation
Correctly align the connecting areas and gently slide the monitor
downward so that the monitor is securely attached to the
instrument as indicated below.