Autel Autolink AL301 - Manual (Page 17)

16
“←”-- A flashing Left Arrow indicates additional information is
available on the previous screen.
1. Select ―3. I/M‖ from the main menu by pressing the ENTER
button.
 If the Scan Tool is not connected yet, then refer to
“Reading Codes” from 1 to 6 at Section 4.1.
2. Use the SCROLL button to view the status of the MIL light
(“ON” or “OFF) and the following monitors:
MISFIRE--Misfire monitor
FUEL--Fuel System Monitor
CCM--Comprehensive Components Monitor
CAT-- Catalyst Monitor
HCM--Heated Catalyst Monitor
EVAP-- Evaporative System Monitor
2AIR-- Secondary Air Monitor
A/C--A/C system Monitor
O2S-- O2 Sensors Monitor
HO2S--O2 Sensor Heater Monitor
EGR-- EGR System Monitor
3. Press the ENTER button to return to the main Menu.