Tone on/off – Autel PowerScan PS100 User Manual
Page 9
8
Figure 5
Tone On/Off
While the tool in this mode, just do a quick press of the mode button
to toggle the tone on or off. While quickly pressing (a quick press
and release) the mode button, if a short high beep is heard, this
means the audio tone is turned on. If a short low beep is heard, the
audio tone is turned off. (Figure 6)
This function is invaluable when working in bright areas where LED
illumination alone is not sufficient. The audio feature may be
disengaged when desired, such as for applications where the tool will
be connected to circuits for long periods of time and the audio could
become annoying.
Figure 6