AUMA Electric part-turn actuators SG 05.1 - 12.1_SGR 05.1 - 12.1 NORM - Manual (Page 21)

17. Setting the electronic position transmitter RWG (option)
— For remote indication or external control —
After mounting the part-turn actuator to the valve, check setting by measuring
the output current (see sections 17.1 or 17.2) and re-adjust, if necessary.
The position transmitter board (figure P-1) is located under the cover plate
(figure P-2).
Part-turn actuators SG 05.1 – SG 12.1 / SGR 05.1 – SGR 12.1
Operation instructions AUMA NORM
21
Terminal plans KMS TP_ _ 4 / _ _ _
3- or 4- wire system
KMS TP _ 4 _ / _ _ _
KMS TP _ 5 _ / _ _ _
2-wire system
Output current I
a
0 – 20 mA, 4 – 20 mA 4 – 20 mA
Power
supply
U
v
24 V DC, ±15 %
regulated
14 V DC + (I x R
B
),
max. 30 V
Max. input
current
I 24 mA at 20 mA
output current
20 mA
Max. load R
B
600 Ω (Uv - 14 V) / 20 mA
Table 5: Technical data RWG 4020
Figure P-1: Positioner board