Neff C77V60N2 - Manual (Page 51)

Neff C77V60N2 | 02/2012
English | 49
Adjusting the grinding unit
The rotary selector (11) on the top of the
appliance adjusts the degree of grinding
from coarse to fine as required.
11 11
Warning: Adjust the grinding unit
only while it is running. Otherwise
the appliance may be damaged.
1. Deploy the appliance fully (see
“ Deployment system”).
2. In the drink selection menu, select
Espresso .
3. Press
z
(6).
4. While the grinding unit is running, adjust
the rotary selector (11) from fine to
coarse or back as required.
The new setting will not become
apparent until after the second cup
of coffee.
For dark roast coffee beans,
choose a finer grind, for lighter
beans a coarser grind.
Checking the water hardness
The water hardness setting can be adjusted
on this appliance. It is important to set the
water hardness correctly, so that the appli-
ance indicates accurately when the descal-
ing programme should be run. The factory
setting for the water hardness is 4.
You can check the water hardness using the
enclosed test strip or by asking your local
water supplier.
Dip the test strip briefly in water, gently
shake off any drips, and check the result
after one minute.
Water hardness levels and settings:
Level Water hardness
German (°dH) French (°fH)
1
2
3
4
1 - 7
8 - 14
15 - 21
22 - 30
1 - 13
14 - 25
26 - 38
39 - 54
Tips on energy saving
X The appliance is put into “energy saving
mode” by retracting the navigation button.
The appliances uses very little power
when in “energy saving mode”, but moni-
tors all safety-relevant functions so as to
avoid damage.
X After one hour (factory setting), the appli-
ance switches off automatically and does
not consume any more energy. The de-
fault time of one hour can be shortened
(see “Auto off after” under “Displaying
settings”).
X
If the appliance is not being used, switch
it off at the power switch.
X
If possible, do not interrupt coffee or milk
froth dispensing. Stopping a process
prematurely results in higher energy con-
sumption and the drip tray fills up more
quickly.
X Always descale the appliance when
Service - descale is displayed (see
“Descaling”) to avoid a build-up of lime-
scale. Limescale residue results in higher
energy consumption.