Neff C77V60N2 - Manual (Page 46)

Neff C77V60N2 | 02/2012
44 | English
Preparation using milk
For optimal milk froth, use cold milk
with a fat content of at least 1.5 % if
possible.
1. Slide the coffee outlet (20) downwards.
Remove the cover and pull out the milk
frother (19):
19 a
19 b
20
19
2. Deploy the appliance
(see “Deployment system”).
3. Take the milk tube supplied with the ap-
pliance and connect it to the attachment
point on the milk frother (19).
12 12
19
4. Attach the milk frother (19) and push the
milk tube (12) into the indentation.
19 19
5. Close the cover.
6. Push the appliance back in.
7. Place container with milk next to the milk
frother. Introduce the milk tube into the
container. The notched end of the tube
should be fully immersed in the milk.
8. Place a cup or glass under the coffee
outlet.
9. Use the navigation button (4) to select
Latte Macchiato , Cappuccino , White
coffee or My coffee (your own special
coffee / milk mix). The display shows the
selected drink along with the setting for
coffee strength and per-cup quantity for
this drink:
Coffee Latte Macchiato Cappuccino
regular
medium glass
10. Choose your settings for strength and
per-cup quantity.
11. Press
z
(6).
First milk is drawn in, prepared and dis-
pensed into the cup or glass. Immediately
after that the coffee is brewed and then runs
into the cup or glass.
In the case of the strength settings
double strength and double
strength extra , the appliance
brews twice in succession.
Wait until the procedure is fully
completed.
Dried milk residue is difficult to
remove, so clean the milk system
immediately after use (see
“ Cleaning the milk system”).