American Expedition Vehicles Brute Double Cab Tonneau Cover - Manual (Page 2)

PLEASE READ BEFORE YOU START
TO GUARANTEE A QUALITY INSTALLATION, WE RECOMMEND READING THESE INSTRUCTIONS
THOROUGHLY BEFORE BEGINNING ANY WORK. THESE INSTRUCTIONS ASSUME A CERTAIN
AMOUNT OF MECHANICAL ABILITY AND ARE NOT WRITTEN NOR INTENDED FOR SOMEONE NOT
FAMILIAR WITH AUTO REPAIR.
ii
This product is covered under the AEV Parts Limited Warranty, a copy of which can be found at aev-conversions.com/warranty.
INCLUDED PARTS QTY REQUIRED TOOLS
Tonneau Cover 1 Common Hand Tools
Brackets 4 Drill Motor
Hardware Pack 1 5/16” Drill Bit
Drill Stop (recommended)
Plastic Rivet Gun
Caution
Remove any and all foreign objects and material before folding the Tonneau cover.
Failure to remove all foreign objects and/or material may cause untimely wear and
damage to the Tonneau cover material and weather resistance and in doing so void
the warranty.
Warning
The AEV Tonneau cover is designed to provide a certain amount of weather resistance
to material and items in the bed of your Brute. Do not store items in your bed that are
not weather proof or items you do not wish to be subject to environmental conditions
in which your vehicle will be driven.
Warning
Do not place any objects on any part of the Tonneau cover at any time or in any posi-
tion. The AEV Tonneau cover is not intended for nor was it designed as a storage shelf,
rack, and/or hammock. If you use this Tonneau cover as a storage shelf, rack, and/or
hammock it will be damaged and void the warranty.