American Expedition Vehicles JK High Steer Kit - Manual (Page 7)

6
Washer
Free Nut
Spacer
Steering Damper
Washer Lock Nut
40 ft/lbs
Figure 7
VIII. SHOCK DOUBLER BRACKETS
1. Remove shocks at lower mount.
2. Install Shock Doubler brackets on both sides as shown using supplied hardware (Fig. 8).
3. Install shocks in Shock Doubler brackets as shown using supplied hardware (Fig. 8).
Torque to 22 ft/lbs
NOTE: The front hole on the
right side bracket will need to be
drilled out to 3/8”
Torque to 56 ft/lbs
NOTE: Use a 3/8” drill bit or the
provided self-tapping bolt to
enlarge the factory hole.
Torque to 22 ft/lbs
Figure 8