Alpha Technologies Cordex 48-1kW 19 6000W Installation - Manual (Page 30)

030-706-B2 Rev B Page 22 of 26
7.4 Factory Ranges and Defaults
The following table lists the rectifier settings/ranges/defaults; changes are made via the CXC:
Setting Range (minimum to maximum) Default
Float (FL) Voltage 47.5 – 58.2V 54V
Equalize (EQ) Voltage 49.8 – 60.2V 55V
Battery Test (BT) Voltage 44 – 52V 46V
OVP See note below – 63V 57V
Current Limit (CL) 23 – 100% 100%
Power Limit (PL) 0 – 100% 100%
Module Start Delay 0 – 250s 1s
System Start Delay 0 – 600s 0s
Low Voltage Alarm (LVA) 42 – 52V 44V
High Voltage Alarm (HVA) 52 – 63V 55.5V
EQ Timeout 1 – 2399h 30h
BT Timeout 1 – 250h 8h
Softstart Ramp-rate Normal/Fast Normal
CL/PL Alarm Enable/Disable Enable
Remote Shutdown Enable/Disable Enable
Ramp Test Enable/Disable Enable
Table F–Cordex 48-1kW rectifier factory ranges and defaults
NOTE: OVP cannot be set below the present system/FL/EQ/BT voltage setting or the safe mode voltage of 51.4V.