Mechanical, Environmental, Standards – Alpha Technologies INEX 100A STS Module and MBS+PDU User Manual
Page 6
Specifications for INEX 100A STS Module and MBS+PDU Continued
Argus Technologies Ltd.
019-061-B1 Rev A WC
Printed in Canada. © 2009 Argus Technologies Ltd. ARGUS is a registered trademark of Argus Technologies Ltd. All Rights Reserved.
Page 2 of 2
Mechanical
STS Module:
Dimensions: 88mm H x 218mm W x 270mm D
[3.5" H x 8.6" W x 10.6" D]
Weight:
2.1 kg (4.6 lb.)
STS Shelf:
Dimensions: 88.1mm H x 483mm W x 330mm D
[3.5" H x 19" W x 13" D]
Weight:
7.0 kg (15.4 lb.)
Hot Swappable:
STS hot swappable only available when MBS at Mains Bypass and
Inverter Bypass position
Mechanical Bypass Switch Requirement: The STS module used with a Mechanical Bypass Switch module shall
provide voltage free system maintenance. It should be interlocked with
the static switch module so that the static switch module cannot be
removed without the maintenance bypass being activated.
Force Cooling:
Two fans
Alarm Relay:
Dry contact alarm output
Environmental
Operating Temperature:
-20 to +70°C (-4 to +158°F)
-20 to +50°C (-4 to +122°F) with full performance
Storage Temperature:
-30 to +85°C (-22 to +185°F)
Operating Humidity:
0 to 95% relative, non-condensing
Heat Dissipation:
Forced air cooling
Operating Altitude:
1500m (4922 feet)
Audible Noise:
55dB ETS 300 753 Class 3.1
Standards
Safety Compliance:
EN 62040-1-1/IEC 62310-1/UL-1778
Certification: CE,
UL
RoHS: Compliant
EMC: EN55022
Class
B
MTBF:
>200,000 hours as per Telcordia SR-332
The above information is valid at the time of publication. Consult factory for up-to-date ordering information. Specifications are subject to change without notice.