Alpha Technologies Fiber Backhaul Enclosure (FBE) User Manual
Page 15
15
2.0 Installation
021-081-B0-001 Rev.A
2.2
Enclosure Installation, H-Bracket (continued)
Most codes require the base of the enclosure to be located a minimum height from the ground. Always
verify height restrictions before proceeding.
Recommended Tools and Materials:
•
Ratchet with 5/8" (19mm) socket
• Level
•
7/16" x 1" (M12 x 25) hex head stainless steel bolts (quantity 4)
•
1” (25.4mm) diameter (minimum 0.1"/2.5mm thick) stainless steel fl at washer for 7/16” (M12) bolt
(quantity 4)
•
Stainless steel helical lock washer for 7/16” (M12) bolt (quantity 4)
•
Lifting kit (optional)
Installation Procedure:
1. Position the enclosure on an H-Bracket capable of supporting 350lbs (160kg).
2. The optional lifting ears may be used to raise and position the empty enclosure.
3. Using a level, ensure that the enclosure base is parallel to the ground.
4. Secure the enclosure to the H-Bracket using four user-supplied 7/16" x 1" (M12 x 25) hex head
stainless steel bolts, helical lock washers and fl at washers.
Figure 2-5, FBE Installation
Stainless Steel Hex Head Bolt,
Helical lock washer & Flat Washer
(4 Places)
29.5”
(657mm)
39.9”
(1013mm)