Aeromotive 18668 - UNIVERSAL A1000 STEALTH PUMP ASSEMBLY - Manual (Page 4)

7. Now install the fuel pump retainer ring into the tank and secure it with the two tapered screws
provided. Use some thread sealant on the threads to prevent leaks. Figure 1-5
FIGURE 1-5
8. Measure the depth of the tank so you know the length the pump assemble needs to be. Subtract
.125-.250” off of the length, so the pickup isn’t resting on the bottom of the baffle. Cut the
supplied tube to desired length. Debur the inside of the pipe and chamfer the outside edge so it
doesn’t cut the o-rings when you push the tube into the clamps (use light grease or oil to aid in
assembly). Assemble the pump and filter as shown in figure 1-6 (figure shown is the shortest
configuration, 9.75”).
FIGURE 1-6