Aeromotive 18668 - UNIVERSAL A1000 STEALTH PUMP ASSEMBLY User Manual
Page 3
5. Drill two .375” holes near the bottom of the baffling running from the front to rear of the vehicle. Also
construct an 8” x 1.6” x 1.6” wall along the bottom of the baffle box for the return to feed into. This will
keep the fuel calm at the pickup point and reduce the chance of cavitation. Figure 1-3
FIGURE 1-3
6. Typical position for the baffle box is below the fuel pump cut out. Although they can be mounted
apart. For this illustration we will use the most common. Position the baffle box below the fuel pump
cut out and secure it to the floor of the tank. When finished it will look like figure 1-4.
NOTE: Pump does not need to be mounted directly above the baffle box. It can be mounted
anywhere on the top of the tank as long as you can get a tube from the pickup filter
assembly to the inlet of the pump.
FIGURE 1-4