ABUS TVIP515x0 - Manual (Page 112)

112
English
Delete: An area can be removed from the list by selecting it and then pressing the
“Delete” button.
Deny Range:
Make the settings for IP areas that are not permitted to access the network
camera here (blocked access).
Start IP Address: Start address for a blocked IP area.
End IP Address: End address for a blocked IP area.
Add: The data is added to the list of blocked areas.
Deny Range List:
List of all blocked IP areas.
Delete: An area can be removed from the list by selecting it and then pressing the
“Delete” button.
Accept the settings by pressing “OK” or cancel them by pressing “Cancel”.
6.5 PTZ control
Here you can enable the PTZ function.This function can only be used in combination with external mechanical
PTZ driver. You can control PTZ driver via RS-485 interface.
The PTZ console is only visible in the liveview if PTZ is enabled.
Pan speed:
Set the pan speed here (0-100).
Tilt speed: Set the tilt speed here (0-100).
Auto Pan speed: Set the automatic pan speed here (0-100).
Protocol: Set the Protocol
Baud rate: Set the Baud rate
Address: Set the address (0-128)