English – ABUS TVCC81500 Quick Operating instructions User Manual
Page 37

37
English
4.3 Installing the TVCC81500 on a wall
1. Install the desired mount, see point 7
“Installing the mounts”.
2. Remove the adhesive strips from the dome.
3. Attach the mounting plate to the mount.
4. Configure the dome address, baud rate and other settings using the SW 1 and SW 2 DIP switches,
see description, point 3).
As the speed dome adapts automatically to PELCO-D and PELCO-P, no setting with regard to
the protocol is required here.
This manual is related to the following products: