AAEON FOX-81D - Manual (Page 22)

L C D D i s p l a y F O X - 8 1 D
Chapter 2 Hardware Installation 2-7
9 Not Used 10 Not Used
2.6 VESA Wall Mounting
Mounting the LCD Display with UL Listed Wallmount Bracket only.
The LCD Display can be mounted on a monitor arm or wallmount
plate.
Caution:
When mounting the LCD Display, take care to tighten the
retention screws or bolts until fully secured, but do not over
tighten. Over tighting the retention screws or bolts may cause
them to become stripped, rendering them useless.
Monitor Arm or Wallmount Plate Installation
The LCD Display has Video Electronics Standards Association
(VESA) standard mounting holes tapped into the rear panel. The
standard hole of the FOX-81D complies to 75mm x 75mm.