AAEON FOX-81D - Manual (Page 19)

L C D D i s p l a y F O X - 8 1 D
Chapter 2 Hardware Installation 2-4
2.3 Connecting Cables
Connecting the Power cable, VGA cable and RS-232 cable onto the
FOX-81D and computer, and screw the three cables tightly on the
FOX-81D as below.
Before connecting the FOX-81D to the computer, remember to turn
off the computer first. After each connector on the computer is
secured, turn on the computer.
Note:
1. The "Surge Protection" is already implemented
2. If it doesn't screw tightly, the water-proof function may not work.
The machine will get damaged when liquid pours