AAEON EMB-Q77B - Manual (Page 39)

3-9 Chapter 3: BIOS setup
3.4 Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an
item then press to display the sub-menu.
3.4.1 Power Mode [ATX Type]
Allows you to select the power supply type.
Configuration options: [ATX Type] [AT Type]
3.4.2 PCH-IO Configuration
PCIE Express Configuration
Allows you to configure the PCI Express settings.
PCH Azalia Configuration
Allows you to configure the PCH Azalia settings.
PCH LAN Controller
Allows you to enable or disable the integrated LAN.
The following item appears when you set the PCH LAN Controller item to
[Enabled].
Wake on LAN [Enabled]
Allows you to enable or disable the integrated LAN to wake up the system.
Configuration options: [Enabled] [Disabled]
Restore AC Power Loss [Last State]
[Power On]
The system goes into on state after an AC power loss.
[Power Off] The system goes into off state after an AC power loss.
[Last State] The system goes into either off or on state, whatever the system
state was before the AC power loss.
3.4.3 System Agent (SA) Configuration
Graphics Configuration
Allows you to configure the graphics settings.
Primary Display [Enabled]
Allows you to select the graphics device for primary display.
Configuration options: [Auto] [IGFX] [PEG] [PCI] [SG]