AAEON EMB-Q77B - Manual (Page 37)

3-7 Chapter 3: BIOS setup
3.3.9 AMT Configuration
The items in this menu allow you to change the Intel ® Active Management
Technology (AMT) feature.
Intel
® AMT [Enabled]
Allow you to enable or disable the Intel ® Active Management Technology (AMT) in
the BIOS extension. Configuration options: [Enabled] [Disabled]
• iAMT H/W is always enabled. This option just controls the BIOS extension
execution. If enabled, this requires additional firmware in the SPI device.
• The following two items become configurable only when you set the
Intel ® AMT item to [Enabled].
Un-Configure ME [Disabled]
Sets this item to [Disabled] to unconfigure AMT/ME without using a password or
set it to [Enabled] to use a password. Configuration options: [Enabled] [Disabled]
3.3.10 USB Configuration
The items in this menu allow you to change the USB-related features.
The USB Devices item shows the auto-detected values. If no USB device is
detected, the item shows None.
Legacy USB Support [Enabled]
[Enabled]
Enables the support for USB devices on legacy operating systems
(OS).
[Disabled] The USB devices can be used only for the BIOS setup program.
[Auto] Allows the system to detect the presence of USB devices at
startup. If detected, the USB controller legacy mode is enabled. If
no USB device is detected, the legacy USB support is disabled.
USB3.0 Support [Enabled]
[Enabled]
Enables the USB 3.0 (XHCI) Controller support.
[Disabled] Disables the function.