AAEON EMB-Q77B - Manual (Page 35)

3-5 Chapter 3: BIOS setup
3.3.4 S5 RTC Wake Settings
This item allows you to enable the system to wake up from S5 state using an alert
event.
Wake system with Fixed Time [Disabled]
Allows you to enable or disable the system’s wake-on alert event. When enabled,
the system wakes up on the specified time.
Configuration options: [Enabled] [Disabled]
Wake system with Dynamic Time [Disabled]
Allows you to enable or disable the system’s wake-on alert event. When enabled,
the system wakes up on the current time plus the specified wake-up minute.
Configuration options: [Enabled] [Disabled]
3.3.5 Trusted Computing
The items in this menu allows you to configure the Trusted Computing settngs.
Security Device Support [Disabled]
Allows you to enable or disable BIOS support for security device. O.S. will not
show Security Device. TCG EFI protocol and INT1A interface will not be available.
Configuration options: [Disabled] [Enabled]
3.3.6 CPU Configuration
The items in this menu show the CPU-related information that the BIOS
automatically detects.
Hyper-threading [Enabled]
Enabled for Windows XP and Linux (OS optimized for Hyper-Threading
Technology) and Disabled for other OS (OS not optimized for Hyper-Threading
Technology). When Disabled, only one thread per enabled core is enabled.
Active Processor Cores [All]
Allows you to choose the number of CPU cores to activate in each processor
package. Configuration options: [All] [1]]
Configuration options for active processor cores are dependent on the installed
CPU.