AAEON EMB-KB1 - Manual (Page 38)

3-8 EMB-KB1
3.4 Chipset menu
The Chipset menu items allow you to change configuration options for the North
Bridge and South Bridge.
3.4.1 North Bridge
DDR3L Voltage Selection [1.5V]
Configuration options: [1.35V] [1.5V]
PCI GEN Speed [GEN2]
Configuration options: [GEN1] [GEN2]
GFX Configuration
DP0 Output Mode [LVDS]
Configuration options: [LVDS] [Disabled]
LVDS1 [Enabled]
Configuration options: [Disabled] [Enabled]
LVDS1 Panel Type [1024x768, 18bit, 60Hz]
Select the type of LCD panel used as display.Configuration options:
[640x480, 18bit, 60Hz] [800x480, 18bit, 60Hz] [800x600, 18bit, 60Hz]
[1024x600, 18bit, 60Hz] [1024x768, 18bit, 60Hz] [1024x768, 24bit, 60Hz]
[1280x768, 24bit, 60Hz] [1280x1024, 48bit, 60Hz] [1366x768, 24bit, 60Hz]
[1440x900, 48bit, 60Hz] [1600x1200, 48bit, 60Hz] [1920x1080, 48bit, 60Hz]
[1920x1200, 48bit, 60Hz]
LVDS Backlight Level [80%]
Select the default backlight brightness of the LVDS display. Configuration
options: [100%] [90%] [80%] ~ [0%]
LVDS Backlight Type [Normal]
Select backlight control type. Configuration options: [Normal] [Inverted]
DP1 Output Mode [Single Link DVI-D]
Configuration options: [Single Link DVI-D] [Disabled]
3.4.2 South Bridge
HD Audio Azalia Device [Enabled]
Configuration options: [Enabled] [Disabled]