AAEON GENE-LN05 Rev.B - Manual (Page 34)

S u b C o m p a c t B o a r d G E N E - L N 0 5 R e v . B
Chapter 2 Quick Installation Guide 2-20
L1 SPD100_LED L2 SPD1K_LED
L3 ACT_LED L4 +3.3V
2.38 RJ-45 Ethernet #1 (CN25)
Pin S i g n a l P i n S i g n a l
R1 GPHY_MDIO0+ R2 GPHY_MDIO0-
R3 GPHY_MDIO1+ R4 GPHY_MDIO1-
R5 TCD0 R6 TCD1
R7 GPHY_MDIO2+ R8 GPHY_MDIO2-
R9 GPHY_MDIO3+ R10 GPHY_MDIO3-
L1 SPD100_LED L2 SPD1K_LED
L3 ACT_LED L4 +3.3V
2.39 Digital I/O Connector (CN26)
Note: The max. rating of Pin 1 ~ Pin 8 is 3.3V@8mA
The max. rating of Pin 9 is [email protected]
This connector offers 4-pair of digital I/O functions .
BIOS using the I2C Bus to read/write internal DIO registers and the Serial
Bus address is 0x6E.
The pin definitions are illustrated below:
Pin Signal P i n Signal
1 Port 1 2 Port 2
3 Port 3 4 Port 4
5 Port 5 6 Port 6
7 Port 7 8 Port 8
9 +3.3V 10 Ground