Elmo Rietschle L-BV5 Supplementary instructions - Manual (Page 9)

EU Declaration of conformity
© Gardner Denver Deutschland GmbH 9 / 12 610.44440.40.200
EU Declaration of conformity
EU declaration of conformity
Manufacturer: Gardner Denver Deutschland GmbH
P.O. Box 1510
D-97605 Bad Neustadt / Saale
Responsible for documentation: Holger Krause
P.O. Box 1510
D-97605 Bad Neustadt / Saale
L Series Liquid ring vacuum pump/ compressor
L-BV2, L-BV5 Designation:
Types 2BV2 060-..D..-Z
2BV2 061-..D..-Z
2BV2 070-..D..-Z
2BV2 071-..D..-Z
2BV5 110-..D..-Z
2BV5 111-..D..-Z
2BV5 121-..D..-Z
2BV5 131-..D..-Z
2BV5 161-..D..-Z
2BV2 060-..G..-Z
2BV2 070-..G..-Z
2BV2 071-..G..-Z
2BV5 110-..G..-Z
2BV5 121-..G..-Z
The liquid ring vacuum pump/compressor described above with motor fitted as per the EC declaration of conformity
issued by Siemens complies with the following applicable Community harmonisation legislation:
94/9/EC Directive 94/9/EC of the European Parliament and the Council of 23 March 1994 on the approximation of
the laws of the Member States concerning equipment and protective systems intended for use in
potentially explosive atmospheres
II 2G b c T3
2006/42/EC Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and
amending Directive 95/16/EC
The protection targets of the directive 2006/95/EC have been met
Harmonised standards applied:
EN 1012-1:1996 Compressors and vacuum pumps — Safety requirements — Part 1: Compressors
EN 1012-2:1996 Compressors and vacuum pumps — Safety requirements — Part 2: Vacuum pumps
EN 1127-1:2007 atmospheres — Explosion prevention and protection —
Part 1: Basic concepts and methodology
EN 13463-1:2001 Non-electrical equipment for potentially explosive atmospheres —
Part 1: Basic method and requirements
EN 13463-5:2003 Non-electrical equipment intended for use in potentially explosive atmospheres —
Part 5: Protection by constructional safety "c"
EN 13463-6:2005 Non-electrical equipment for use in potentially explosive atmospheres —
Part 6: Protection by control of ignition source "b"
The technical documentation is stored at the notified body DEKRA EXAM GmbH, no. 0158 under certification number
BVS 03 ATEX H/B 072/ BVS 03 ATEX H/B 073.
Bad Neustadt/Saale, 29.12.2009
(Place and date of issue)
ppa. Fred Bornschlegl
(Name and function) (Signature)
664.44440.40.200