Operation, X operation x – Liberty Pumps PRG-Series User Manual

Page 9

- 9 -

7. x

Operation

OPERATION

After the electrical and mechanical installations have been performed, the pump is ready for operation. No

operational procedures are required except to apply rated power to the pump. There are no specific shutdown

procedures beyond disconnecting the power supply.

IF THE ROTATION OF A SINGLE PHASE PUMP IS INCORRECT, NOTIFY THE LIBERTY PRODUCT

SERVICE DEPARTMENT IMMEDIATELY. DO NOT SWITCH THE POWER SUPPLY LEADS. DO NOT

OPERATE THE PUMP.

ALWAYS ENSURE THAT THE PUMP IS FREE OF WIRES OR OTHER OBSTRUCTIONS THAT MAY CAUSE

HARM OR INJURY.

PERIODIC MAINTENANCE & LUBRICATION

Liberty pumps are designed for long lasting, efficient and reliable service with a minimum of preventive

maintenance checks. These checks are few but will add years of satisfactory service to the life of the pump

LUBRICATION

Pump is permanently lubricated and cooled by turbine oil. If replacement oil is required, use ISO-10 turbine oil.

Capacity .5 gallons.

5
.

Operation