NXG Technology NX-MOUNT-ART-M User Manual
Page 10
P10
STEP 4 - ATTACH PANEL TO MOUNT
Hang with monitor attached
STEP 4 - SECURE MONITOR PLATE TO ARM ASSEMBLY, LEVEL, AND TILT
Locking mechanism
Secure Monitor Plate to Arm
using 2 philips screws and
Cross screwdriver . Tighten
only to snug tension.
Heavy, Assistance
Required
Flat panel can be leveled (+/- 3
degrees) as needed. If security
screws are tensioned tight it will
be difficult to adjust leveling.
Rotate Ratchet Handle
clockwise to tension tilt
mechanism. For additional
tension Pull lever to side,
rotate counter-clockwise
and repeat tension process.
Position panel to desired tilt
angle.