Pump Solutions Group Neptune Chemical Feed Solutions for Agriculture CENTER PIVOT & DRIP - Manual (Page 3)

EZE-Grab
FERTILIZER PUMP PLATFORMS
Purpose
A one-piece molded polyethylene platform
with handles allows easy handling of fertilizer
pumps. Unit integrates pump controls and
wiring for complete portability.
Features
• Strong, lightweight polyethylene
base (order pump separately)
• Resistant to corrosion
• Electrical controls for 3 phase 460 volt
motors are standard; 12VDC and
115VAC available as options
• Manual motor starters provided for AC units
include adjustable overload protection
• 12 volt units include solenoid to auto-
matically disconnect motor from
battery when system shuts down
• 12 ft. power cord
Optional accessories include:
• Suction Assembly • Injectors
• Discharge Assembly • Discharge Bleeder Assembly
Ordering Information
MODEL DESCRIPTION
EFP-1 EZE-Grab Fertilizer Platform* –
No Controls
EFP-460 EZE-Grab Fertilizer Platform*
w/ 460v Manual Motor Starter
EFP-12 EZE-Grab Fertilizer Platform*
w/ 12v Solenoid Cutoff
ESA-75 3/4" Suction Assembly, 12' long**
ESA-100 1" Suction Assembly, 12' long**
EDA-50 1/2" Discharge Assembly, 12' long
EDA-50C EDA-50 with Double Wall
EDA-75 3/4" Discharge Assembly, 12' long
EDB-50 Discharge Bleeder Assembly
* *Includes: Suction & Discharge Hose Barb Fitting
**See chart below
Maximum Suction Line Length
CAUTION: Must Use Non-Collapsing Type Hose
TUBE I.D. 1/2" 3/4" 1" 1-1/2"
18 GPH 6' 10' 15' N.A.
30 GPH N.A. 10' 15' N.A.
40 GPH N.A. 6' 10' 15'
65 GPH N.A. 5' 8' 12'
80 GPH N.A. N.A. 6' 10'
The “E”Liminator eliminates:
• Yield robbing pests from
your fields
• High cost of other
application methods
• Waiting for commercial
applicators
• Soil compaction and
crop damage
• Skips and overlaps by
using your center pivot
as a spray boom
• Handling cumbersome
injection systems when
small volume applications
are required
Purpose
Model CIS-30 combines a Neptune Series 500 hydraulic
diaphragm pump with a lightweight, portable, 30 gallon
tank and accessories to offer the “E”Liminator chemigation system.
The small tank offers greater convenience than larger systems and the
Neptune Series 500E completes this portable unit to offer an economical
system for applications which do not need to handle high viscosity chemicals.
• Fully assembled with
pump, tank, piping valves and strainer
• Order pump separately:
— Use Series E for clear liquids and light suspensions
— Use Series VS for heavier suspensions or
high viscosity chemicals
MODEL
EFP-460
MODEL
EFP-12
MODEL CIS-30
with Series 500VS Pump
and Controls
MODEL CIS-30
with Series 500E Pump and Controls
“E”Liminator
Chemigation Systems “E”Liminator
Chemigation Systems
Each CIS-30 “E”Liminator includes:
• 30 gallon calibrated tank
• Molded base with four molded handles
for portability
• Pump and mixer motor starting switches
with overload for motor control, 3 phase,
460 volt
• Calibration column marked in ounces
and milliliters