Pump Solutions Group Neptune FERTILIZER PUMPS Series 500 HYDRAULIC DIAPHRAGM METERING PUMPS - Manual (Page 2)

EZE-Grab
FERTILIZER PUMP PLATFORMS
Purpose
A one-piece molded polyethylene
platform with hand grips to allow
easy handling of fertilizer pumps.
Unit integrates pump controls and
wiring for complete portability.
Features
• Strong, lightweight polyethylene
base (order pump separately)
• Resistant to corrosion
• Electrical controls for 3 phase
460 volt motors are standard;
12VDC and 115VAC available as options
• Manual motor starters provided for AC units
include adjustable overload protection
• 12 volt units include solenoid to automatically disconnect
motor from battery when system shuts down
• 12 ft. power cord
MODEL
EFP-460 MODEL
EFP-12
© 2008 Neptune Chemical Pump Company
All Rights Reserved
Bulletin AGF-08 P/N ZL104536 Printed in U.S.A.
P.O. Box 247 • Lansdale, PA 19446-0247
Tel: 215-699-8700 • Fax: 215-699-0370
Toll-Free Tel: 1-888-3NEPTUNE (1-888-363-7886)
Toll-Free Fax: 1-800-255-4017
Web Site: http://www.neptune1.com
E-mail: [email protected]
Injection Quills allow chemicals to be injected into the turbulent flow
near the center of the line, providing more uniform dispersion.
The Disk Type Check and Seat are located at the tip of the quill to allow constant flushing.
• Provides back pressure to insure metering accuracy
• Prevents back flow
• Prevents bleed through when water pressure is low or line is drained
• Prevents siphoning when metering pumps are off and line is flowing
Mount directly to a coupling in the sidewall of lines 6 inches and
larger. For smaller lines the quill may be mounted to a coupling
attached to a nipple (of the length required), to hold the tip of the
quill near the center of the line.
Agricultural Services Center
P.O. Box 406 • 201 S. Georgetown Unit #1 • Yuma, CO 80759
Tel: 970-848-2550 • Fax: 970-848-2652
INJECTION QUILLS
PART LINE CONN. INLET CONN. * FLOW * BODY CHECK SPRING MAX. MAX.
NUMBER NPT NPT GPH MATERIAL MATERIAL MATERIAL PRESSURE TEMP.
PPQ50 3/4" 1/4" 50 PP ** Viton 316SS 150 psi 120°F
SSQ75 3/4" 1/2" 200 SS Viton 316SS 150 psi 150°F
SSQ100 1" 3/4" 300 SS Viton 316SS 150 psi 150°F
* At 50-PSI Differential ** Glass Filled Polypropylene
PPQ50
SSQ75
Optional accessories include:
• Suction Assembly • Injectors
• Discharge Assembly • Discharge Bleeder Assembly