Spencer GasCube Natural Gas Booster Skid Package - Manual (Page 3)

3
GAS INLET
Heat Exchanger
GAS OUTLET
Expansion Joint
UL Listed Gas Booster
Skid Base
Control Panel
Pressure Gauge
Pressure Switch
Recirculation Valve
Plug Valve
Protective Plate
(Spencer trademarked
sugar-scoop design)
Rotation
Inspection Port
Recirculation Loop
Product Description
The standard components of a GasCube package include
a UL Listed Spencer natural gas booster, a UL Listed
508A control panel for automatic operation, isolation
valves, expansion joints, gauges, and a recirculation loop.
Larger capacity GasCube models include a gas to air
intercooler and automatic valve in the recirculation loop.
At the heart of the GasCube package design is a UL
Listed, centrifugal, hermetically sealed leaktight gas
booster designed for handling natural gas. The gas
booster increases the pressure of the incoming gas by
guiding it from one stage to the next through diffusers.
The Spencer gas booster configuration is our unique stan-
dard overhung (SOH) design, which has all the impellers
mounted directly on an extended motor shaft.
The GasCube package components are securely mounted
with hardware and accessories on a common skid ready
to be wired to local power and piped to natural gas piping
in accordance with local and national codes.
II. Limited Warranty
We warrant that this product will be free from defects
in material and workmanship for a period of 18 months
from the date of shipment or 12 months from the date of
startup, whichever comes first. Within the warranty period,
we shall repair or replace, F.O.B. our factory or approved
repair facility, such products that are determined by us
to be defective.
This warranty will not apply to any product that has been
subjected to misuse, negligence or accident, or misap-
plied or improperly installed. This warranty will not apply
to any product that has been disassembled, repaired or
otherwise altered by any persons not authorized by the
Spencer Service Department.
The guarantees of the motor, control and component
manufacturers govern the extent of our guarantee on
such equipment. Warranty work on motors, controls and
components must be authorized by Spencer and must
be performed in an authorized shop as designated by
the motor, control and component manufacturers. The
Spencer Turbine Company reserves the right to invoice
all expenses incurred when repairs are made in the field
at the specific request of a customer.
For complete Conditions of Sales, refer to Spencer
Form 706.
Ill. Safety Precautions and
Operating Guidelines
• Read and follow all instructions in this manual. If you
have any questions, consult your Spencer representa-
tive.
• Use appropriately rated lifting equipment for installa-
tion, removal or disassembly of heavy components.
• Remove inlet and outlet pie-plate covers, silica gel
bags and crating materials prior to GasCube package
installations.
• Inspect all openings for tools and foreign matter before
connecting accessories or piping.
The Spencer Turbine Company u 600 Day Hill Road, Windsor, CT USA 06095 u TEL 800-232-4321 u 860-688-8361 u www.spencerturbine.com