Imetec PROFESSIONAL SERIE HB 2000 - Manual (Page 21)

IT
15
CLEANING AND MAINTENANCE
Clean the appliance after having used it.
Disconnect the plug (4) from the socket.
• Wash the removable components: blender stem (5), chopper blades (9) (if present),
chopper bowl (10) (if present), whisk (12) (if present) and container (13) by hand or in
the dishwasher.
• In the dishwasher, make sure the maximum temperature of the water does not exceed
55°C.
• Clean the motor unit (3), chopper lid (8) (if present) and whisk support (11) (if present)
with a damp and well squeezed sponge. Dry with a dry cloth.
PROBLEMS AND SOLUTIONS
Should one of the indicated problems occur, adopt the proposed solution:
Problem Solution
The blades of the hand blender cause
splatters.
Immerse the blades cover of the blender
(6) into the ingredients that are to be
processed.
The chopper blades (9) do not rotate because
food is stuck between the blades (9) and the
bowl (10).
Do not add food that is too hard.
Chop the ingredients into small pieces.
Lift the chopper lid (8) and carefully
remove the piece of blocked food, then
continue the procedure.
The parsley has not been chopped properly. Repeat the operation using dry parsley.
The whisk causes splatters.
Keep the whisk (6) upright at first; tilt it
only when the mixture starts to rise.
DISPOSAL
The packaging is made up of recyclable material. Dispose of it in compliance with the
environmental protection standards.
The appliance must be disposed of properly, in accordance with the provisions of
European standard 2002/96/EC. The recyclable materials contained in the appliance
must be recovered so as to prevent environmental pollution. For further information,
contact the local disposal body or the appliance dealer.
GB
MI000877_multi.indd 15 4/10/12 3:10 pM