Imetec PROFESSIONAL SERIE HB 2000 - Manual (Page 18)

IT
12
CLEANING BEFORE FIRST USE
• Unpack the appliance.
• Wash the removable components: blender stem (5), chopper blades (9) (if present),
chopper bowl (10) (if present), whisk (12) (if present) and container (13) by hand or in
the dishwasher.
• In the dishwasher, make sure the maximum temperature of the water does not exceed
55°C.
• Clean the motor unit (3), chopper lid (8) (if present) and whisk support (11) (if present)
with a damp and well squeezed sponge. Dry with a dry cloth.
ASSEMBLING THE HAND BLENDER
ATTENTION!
• Handle the blender blades (7) with care to prevent accidental cuts.
• DO NOT immerse the motor unit (3) in water
• DO NOT use the appliance with solid ingredients.
• The appliance must not be used for more than 30 seconds. Wait for the
appliance to cool down completely before each cycle.
• DO NOT leave any food residue inside the container (13) for more time
than is required for the preparation.
• Fasten the blender stem (5) to the motor unit (3) by turning it anti-clockwise [Fig. B].
• Insert the ingredients (vegetable soups, fruit with milk or water) in the container (13).
• Insert the blender stem (5) in the container (13), until the blades cover (6) is fully
immersed in the mixture.
OPERATION
The on/off controls have the following speeds:
Low speed, to be used during the initial preparation phase.
High speed: to be used during the final preparation phase or to
add volume to the processed contents.
USING THE HAND BLENDER
Proceed as follows after having assembled the appliance:
• Insert the plug (4) in the socket.
• Press the on/off button (1) or (2) at the desired speed.
GB
MI000877_multi.indd 12 4/10/12 3:10 pM