Installing water filter – Beko GNE V422 X User Manual

Page 14

Text mode
Original mode

Note: Since the following parts are

not required in use with a jug, they
may not be found in the product you
purchased.

3. 5 meter long water pipe (1/4 inch in

diameter)

4. Cold mains water valve with mesh

filter (Tap Adapter)

5. Water Filter to be fitted to the bracket

inside the fridge compartment.

Water connection to the

refrigerator

Please follow the instructions

below.

Installing Water Filter

(in some models)

Installation Requirements

Two different water sources may be
connected to the refrigerator for water
supply: the mains cold water supply
and water in a jug.
A pump should be used for jug water
usage.

Check that the parts stated below are
supplied with your appliance.

1. Union for connection of the water

pipe to the rear of the appliance

2. 3 pieces of pipe clips (In case

required to secure the water pipe)