Extron Electronics MSV0804 - Manual (Page 5)

MSV0804 Matrix Series Switcher Quick Start - v1.0 1/29/02 © 2002 - INLINE, INC.
MSV0804 Series Switchers - Quick Start, continued
Front Panel Controls
Volume buttons adjust the volume of the
selected audio output.
Mute button silences the audio output.
Input Select and Output Select buttons
configure any number of new patches.
Preset button stores or recalls a preset
configuration, which includes all input / output
patches and volume levels.
Blank button blanks the currently selected
output.
IR window receives IR commands from optional
CTL 120 IR remote control.
Functionality
To configure a new input / output patch:
1. Press the desired output select button.
2. Press the input select button you want to
connect to the output.
Example: To patch input 6 to output 2, press:
Output 2 button followed by Input 6 button.
Functionality, continued
To store a preset:
1. Configure all necessary input / output
patches.
2. Adjust audio volume levels.
3. Press and hold the Preset button for 5
seconds.
4. Press the input or output button you
want to use to designate as the preset
number for that configuration.
To recall a stored preset:
Press the Preset button, followed by an
input or output button.
To adjust output audio volume level:
Press the Volume buttons on the front
panel to raise or lower the volume of an
output device.
To mute and/or restore audio output:
Press the Mute button to alternately
silence / restore audio output.