Extron Electronics MSV0804 - Manual (Page 17)

13

2002 - INLINE, INC. MSV0804 OPERATION MANUAL - v1.0 4/26/02
Using the CTL 120-2 Remote Control
CTL 120-2 IR Remote Control sends infrared commands to the CTL101. The CTL101 will convert
these IR signals to serial commands so you can control functions on the MSV0804 matrix switcher. A
diagram outlining the location and function of each button is provided on page 19.
To use the CTL 120-2 remote, press the MATRIX button. The remote is now in matrix switcher mode.
To configure a new input/output patch using the CTL 120-2 remote control:
1. Press the remote control button that corresponds to the desired output select button.
2. Press the remote control button that corresponds to the desired input select button you want to
connect to the output.
Note: The Blank button on the remote control does not work
to blank the currently selected output.