Extron Electronics MSG0603 - Manual (Page 14)

12
MSC0603 OPERATION MANUAL - v1.0 5/7/02

2002 - INLINE, INC.
Using the CTL120-2 Remote Control
CTL120-2 IR Remote Control sends infrared commands to the CTL101. The CTL101 will
convert these IR signals to serial commands so you can control functions on the MSC0603
matrix switcher. A diagram outlining the location of each button is on page 18.
To use the CTL120-2 remote, press the MATRIX button. The remote is now in matrix switcher
mode.
To configure a new input/output patch using the CTL120-2 remote control:
1. Press the remote control button that corresponds to the desired output select button.
2. Press the remote control button that corresponds to the desired input select button you
want to connect to the output.
Note: The Blank button on the remote control does not work to blank the
currently selected output.