Extron Electronics MPA 152 User Guide - Manual (Page 21)

ATTENTION: Use only the two holes indicated in the diagram below for mounting the
MPA 152. The other four holes anchor stand-offs for the internal circuit boards; using
them may damage the amplifier and will not provide secure mounting for the unit.
1.44"
3.67"
#4-40 Thread Thru
Rack Mounting
#4-40 Thread Thru
Rack Mounting
Back of the Rack Mounting
The unit can be mounted at the back of a rack rail using the MBB 100 mounting kit
(part number
70-367-01). Follow the instructions provided with the kit.
Under-desk Mounting
Mount the unit under a desk or podium, using the optional Extron MBU 125 under-desk
mounting kit (part number
70-077-01) by following the instructions provided with the
MBU 125 kit.
Pole Mounting
The amplifier can be mounted above a projector using any of these optional Extron Pole
Mounting Kits:
• PMK 100 Pole mount kit (part number 70-217-01)
• PMK 300 Pole mount kit (part number 70-374-01)
• PMK 350 Pole mount kit (part number 70-563-03)
Follow the instructions provided with the kit.
ZipClip ™ 200 Mounting
The unit can be mounted under furniture or to a rack rail using the ZipClip 200
(part number
101-001-01). Follow the instructions provided with the mounting kit.
MPA 152 • Reference Material 15